- Address717 North Bower Road, Macomb, IL 61765-2511 U.S.A.
- Phone(Working Time)+1-390-897-1454
- Phone(Nonworking Time)+1-390-897-1454
Take-Up Ball Bearing
Contact NowTake-up ball bearing units consist of a positioning screw and either top or side mounting hardware. Their wide inner ring allows for shaft alignment and belt tensioning. Take-up bearing units are used in a range of applications including conveyer belts, fans and blowers, and food processing plants.Take-up ball bearing units consist of a positioning screw and either top or side mounting hardware. Their wide inner ring allows for shaft alignment and belt tensioning. Take-up bearing units are used in a range of applications including conveyer belts, fans and blowers, and food processing plants.
Take-up is the process of adjusting the length of the belt and chain to compensate for stretch, shrinkage, or wear, and to maintain proper tension. This is done with the assembly of the necessary structural and mechanical parts, including take-up bearings. The take-up bearing assembly consists of a housed that is mounted to a frame.
Bearing Number | Bore Dia | Outer DIa | Width | Size |
---|---|---|---|---|
Timken YTU 7/8 SGT Take-Up Ball Bearing | 400 N·m | 22228 CCK/W33 | 77.8 mm | 103 kN |
AMI KHST205-16 Take-Up Ball Bearing | 33.7 mm | Steel/steel | Triple-lip seals | Regular relubricatio |
AMI UEMT208-24MZ20 Take-Up Ball Bearing | 500 mm | Cylindrical Bore | 343 mm | 5 mm |
Timken YTU 15/16 SGT Take-Up Ball Bearing | 180 mm | 168 mm | 2 mm | 0.27 |
INA RHE25 Take-Up Ball Bearing | 100 mm | Single Row | 21,200 N | 0.311 kg |
Timken VTU1 3/16 Take-Up Ball Bearing | 79 mm | 183 kN | 1.6 | 59 mm |
INA RTUE70 Take-Up Ball Bearing | 73 mm | 14.0 | 17,900 N | 1.1 mm |
Timken RTU1 7/16 NT Take-Up Ball Bearing | 77 mm | 174 mm | 93 kN | 14.1 mm |
AMI UCST210C4HR5 Tight ball bearing | 4.6 | 12 mm | 700 mm | 685 mm |
MRC CTW115ZM Tight ball bearing | 47 mm | 45 N | 25 mm | 50 N/µm |
AMI MUCWTPL205B Take-Up Ball Bearing | 21 mm | 6.5 N·m | 80 mm | 0.65 kg |
AMI MUCWTPL205-16RFW Take-Up Ball Bearing | 0.3 mm | 5300 r/min | 0.41 kg | 2250 N |